CERN Accélérateur de science

Accueil > CERN Articles & Preprints > CERN Reports

CERN Reports

Chercher dans 1,797 notices:
Conseils de recherche
Recherche avancée
Add to Search +
Derniers ajouts:
2019-01-30
16:50
Beam screen model heat load and photo-electrons density analysis: Milestone 4.2 / Perez Rodriguez, Francisco Jose ; Chiggiato, Paolo (CERN)
Develop a computer model of the beam screen and report on the analysis of heat load and photo electron densities under the assumed operation conditions. The analysis is made available on the project's document management system..
CERN-ACC-2019-0025.- Geneva : CERN, 2016 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
16:30
Preliminary arc design Baseline: Deliverable D2.4 / Chance, Antoine
In this document we will describe the arc baseline design including a list of beam-line elements (type, description, quantity, physical element characteristics). The taken assumptions, requirements and constraints imposed onto the infrastructure and infrastructure services will be also described..
CERN-ACC-2019-0024.- Geneva : CERN, 2018 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
16:26
Preliminary beam screen and beam pipe engineering design: Deliverable D4.3 / Perez Rodriguez, Francisco Jose ; Chiggiato, Paolo (CERN) ; Garion, Cedric (CERN) ; Fernandez Topham, Javier (Centro de Investigaciones Energéti cas Medioambientales y Tecnológicas (ES))
Drawings of the beam screen and surrounding beam pipe mechanical design as produced for the measurements at the light source. Description of the materials and manufacturing processes used to produce the test element..
CERN-ACC-2019-0023.- Geneva : CERN, 2017 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
16:15
Preliminary EIR design Baseline: Deliverable D3.2 / Seryi, Andrei (University of Oxford (GB)) ; Tomas Garcia, Rogelio (CERN)
Description of the EIR baseline design including a list of beamline elements (type, description, quantity, physical element characteristics). Estimates of the achievable performances at the interaction points. [...]
CERN-ACC-2019-0022.- Geneva : CERN, 2017 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
16:08
Measurements of vacuum chamber at light source: Deliverable D4.2 / Perez Rodriguez, Francisco Jose ; Gonzalez Gomez, Luis Antonio (INFN e Laboratori Nazionali di Frascati (IT)) ; Casalbuoni, Sara ; Chiggiato, Paolo (CERN) ; Kersevan, Roberto (CERN) ; Gil Costa, Miguel (Centro de Investigaciones Energéti cas Medioambientales y Tecnológicas (ES))
Description of the test setup and the measurement conditions including any aspects that may have an impact on the quality of the raw data and analysis. Set of raw data, associated calibration data and relevant environment operation data. [...]
CERN-ACC-2019-0021.- Geneva : CERN, 2017 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
15:59
Analysis of vacuum stability at cryogenic temperature: Deliverable D4.1 / Cimino, Roberto (INFN e Laboratori Nazionali di Frascati (IT)) ; Angelucci, Marco (INFN e Laboratori Nazionali di Frascati (IT)) ; Perez Rodriguez, Francisco Jose ; Chiggiato, Paolo (CERN)
Vacuum stability at cryogenic temperature is a key element for the design of the proton-proton future circular collider FCC-hh. To thermally screen the cold bore of all superconducting magnets a beam screen is a mandatory solution [...]
CERN-ACC-2019-0020.- Geneva : CERN, 2017 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
15:24
Analysis of beam-induced vacuum effects: Deliverable D4.4 / Perez Rodriguez, Francisco Jose ; Chiggiato, Paolo (CERN) ; Bellafont, Ignasi ; Kersevan, Roberto (CERN) ; Garion, Cedric (CERN) ; Baglin, Vincent (CERN)
The vacuum chamber of the FCC-hh will have to cope with unprecedented levels of synchrotron radiation flux and power, dealing at the same time with tighter impedance and magnet aperture requirements. In this new collider the difficulty to maintain an ultra-high vacuum level, essential for a proper operation, increases then considerably compared with the previous collider, the LHC. [...]
CERN-ACC-2019-0019.- Geneva : CERN, 2018 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
15:12
Preliminary EIR design including optimized lattice deck: Deliverable D3.3 / Tomas Garcia, Rogelio (CERN) ; Martin, Roman (CERN)
Annotated beam optics and lattice files with specifications of the required magnet parameters (strengths and apertures) including consolidated position and element characteristics. Specification of the required magnet types and quantities including magnet field quality specifications..
CERN-ACC-2019-0018.- Geneva : CERN, 2019 Fulltext: CERN-ACC-2019-0018 - PDF; EuroCirCol-P3-WP3-D3.3_PreliminaryEIRdesignIncludingOptimizedLatticeDeck_V0200 - PDF;

Notice détaillée - Notices similaires
2019-01-30
14:52
Overview of EIR design options: Deliverable D3.1 / Seryi, Andrei (University of Oxford (GB)) ; Tomas Garcia, Rogelio (CERN)
This document describes the options of EIR design and collider layouts to be considered for further detailed studies. We primarily focus on factors leading to selection of the optimal L* parameter, describe the options considered and the presently selected value, as well as possible further optimization [...]
CERN-ACC-2019-0017.- Geneva : CERN, 2016 Fulltext: PDF;

Notice détaillée - Notices similaires
2019-01-30
14:30
Preliminary arc design including optimized and integrated lattice deck: Deliverable D2.5 / Chance, Antoine
Annotated beam optics and lattice files with specifications of the required magnet parameters (strengths and apertures) including consolidated position and element characteristics. Specification of the required magnet types and quantities including magnet field quality specifications..
CERN-ACC-2019-0016.- Geneva : CERN, 2019 Fulltext: PDF;

Notice détaillée - Notices similaires