CERN Accelerating science

All CERN Accelerators documents

Последно добавени:
2023-02-03
13:05
Study of collisional losses in the Large Hadron Collider for Pb-Pb and p-Pb operation / Frasca, Alessandro
During about one month per operational year, the Large Hadron Collider (LHC) at CERN works as a heavy-ion collider [...]
CERN-THESIS-2022-294 - 156 p.


Подробен запис - Подобни записи
2023-02-02
06:28
Radiofrequency Accelerator R$\&$D Strategy Report: DOE HEP General Accelerator R$\&$D RF Research Roadmap Workshop, March 8-9, 2017 / Belomestnykh, Sergey
Over a two-day period, March 8-9, 2017 the Office of High Energy Physics convened a workshop in Gaithersburg, MD to seek community input on development of a radiofrequency (RF) research ten-year roadmap to guide the General Accelerator Research and Development Program (GARD) [...]
2017. - 37 p.


10.2172/1631119

Подробен запис - Подобни записи
2023-01-30
17:39
Beam optics upgrade for radio frequency quadrupole in LINAC4 project at CERN / Kumar, Sarvesh (Inter-University Accelerator Center IUAC (IN)) ; Bellodi, Giulia (CERN) ; Grudiev, Alexej (CERN) ; Lombardi, Alessandra (CERN) ; Pommerenke, Hermann Winrich
In the framework of the Spare Radio Frequency Quadrupole Project [1] the layout of an enhanced performance RFQ has been explored [...]
CERN-ACC-NOTE-2023-0002.
- 2023. - 7 p.

Подробен запис - Подобни записи
2023-01-27
14:13
The Effect of Ground Motion on the LHC and HL--LHC Beam Orbit / Schaumann, Michaela ; Gamba, Davide (CERN) ; Garcia Morales, Hector ; Corsini, Roberto (CERN) ; Guinchard, Michael (CERN) ; Scislo, Lukasz Grzegorz (Tadeusz Kosciuszko Cracow University of technology (PL)) ; Wenninger, Jorg (CERN)
The High Luminosity Large Hadron Collider (HL--LHC) will require unprecedented orbit stability at the low-beta experiments, ATLAS and CMS [...]
CERN-ACC-NOTE-2022-0076.
- 2022. - 32 p.
Full text

Подробен запис - Подобни записи
2023-01-26
13:46
Influence of vacuum chamber port terminations on beam coupling impedances / Flisgen, Thomas (Berlin FBI) ; Gorgi Zadeh, Shahnam (CERN) ; Gjonaj, Erion (Darmstadt, Tech. U.)
Vacuum chambers of particle accelerators are typically equipped with radio-frequency couplers. The couplers are employed to excite modes for particle acceleration, to extract the energy of higher-order modes, or for diagnostic purposes. [...]
2023 - 9 p. - Published in : Phys. Rev. Accel. Beams 26 (2023) 014601 Fulltext: PDF;

Подробен запис - Подобни записи
2023-01-26
13:46
Diagnostic Needs for Wakefield Accelerator Experiments / Cianchi, A (Rome U., Tor Vergata)
Wakefield accelerators are under development in many laboratories worldwide. [...]
arXiv:2005.08376.
- 2020. - 11 p.
Fulltext

Подробен запис - Подобни записи
2023-01-26
13:46
Final Design of ITER In-Vessel Coils and Manufacturing of In-Vessel Coil Conductor / Encheva, Anna (ITER) ; Bontemps, Vincent (ITER) ; Fichera, Claudio (ITER) ; Laquiere, Julien (ITER) ; Macioce, Davide (ITER) ; Mariani, Nicola (ITER) ; Piccin, Roland (ITER) ; Tronza, Vladimir (ITER) ; Vostner, Alexander (ITER) ; Sgobba, Stefano (CERN)
Following a decision made at the ITER Council in November 2013, two types of in-vessel coils (IVCs), namely, edge-localized mode (ELM) coils to mitigate ELMs and vertical stability (VS) coils to provide vertical stabilization of the plasma, have been incorporated in the ITER baseline design. The in-vessel environment is severe, characterized by large transient electromagnetic fields, high radiation flux, and high temperature. [...]
2022 - 6 p. - Published in : IEEE Trans. Plasma Sci. 50 (2022) 4298-4303

Подробен запис - Подобни записи
2023-01-26
13:45
Performance of the Cable-in-Conduit Conductors for Super-X Test Facility / Dai, Chao (Hefei, Inst. Plasma Phys.) ; Wu, Yu (Hefei, Inst. Plasma Phys.) ; Shi, Yi (Hefei, Inst. Plasma Phys.) ; Sedlak, Kamil (Ecole Polytechnique, Lausanne) ; Bajas, Hugo (Ecole Polytechnique, Lausanne) ; Nijuis, Arend (Twente U., Enschede) ; Hao, Qiangwang (Hefei, Inst. Plasma Phys.) ; Han, Houxiang (Hefei, Inst. Plasma Phys.) ; Liu, YunHao (USTC, Hefei) ; Devred, Arnaud (CERN) et al.
Following the conceptual design, the engineering design of the dc magnet and cable-in-conduit conductor (CICC) for the Super-X test facility has been done in 2021. Totally three types of conductors with different structures were designed for the three pairs of coils in the dc magnet, respectively. [...]
2023 - 5 p. - Published in : IEEE Trans. Appl. Supercond. 33 (2023) 9500105

Подробен запис - Подобни записи
2023-01-26
13:45
Reliability testing of Power Schottky Diodes used for high current rectifying / Lillehaug, Ola
This project was done in cooperation with the TE-EPC-LPC section at CERN [...]
2014. - 50 p.

Подробен запис - Подобни записи
2023-01-26
13:45
Efficient Combination of Surface Texturing and Functional Coating for Very Low Secondary Electron Yield Surfaces and Rough Nonevaporable Getter Films / Himmerlich, Marcel (CERN) ; Zanin, Danilo A (CERN) ; Taborelli, Mauro (CERN) ; Granadeiro Costa, Angelo Rafael (CERN) ; Costa Pinto, Pedro (CERN) ; Lain Amador, Lucia (CERN) ; Vollenberg, Wilhelmus (CERN) ; Baris, Adrienn (CERN) ; Garcia‐Tabares Valdivieso, Elisa (CERN ; Carlos III U., Madrid) ; Perez Fontenla, Ana Teresa (CERN) et al.
The formation of a fissured copper surface by picosecond pulsed laser irradiation is combined with functional coatings consisting of Ti and amorphous carbon layers or a Ti–Zr–V compound film to fabricate surfaces with the maximum of the secondary electron yield being as low as 0.4. By structural and spectroscopic analysis of the formed surfaces it is demonstrated that both coatings enclose the nanostructures generated by redeposition of metal structures from the laser-induced plasma plume, keeping the initial topography intact. [...]
2022 - 8 p. - Published in : Advanced Materials Interfaces 10 (2022) 2201671 Fulltext: PDF;

Подробен запис - Подобни записи