# BE Thesis

Ultimi arrivi:
2022-01-20
16:46
 Application of Machine Learning in Beam Optics Measurements and Corrections / Fol, Elena The present research in high energy physics as well as in the nuclear physics requires the use of more powerful and complex particle accelerators to provide high luminosity, high intensity, and high brightness beams to experiments [...] CERN-THESIS-2021-261 - 115 p.

2021-11-24
11:46
 Review of halo measurements at the Large Hadron Collider with collimator scans / Racano, Paola A good modeling of the beam distribution is essential in order to understand limitiations from overpopulated tails in high-power particle accelerators and ﬁnd the best strategy to clean particles in the tails, that may cause damage to the accelerator components [...] CERN-THESIS-2019-429 - 76 p.

2021-11-19
14:00
 Studies and Optimization for Future Beam Dump Experiments in the K12 and P42 Beams at CERN / Stummer, Florian Wolfgang During the beam operation years 2021-2025 at CERN the NA62 experiment is expected to reach its goal of making a more precise measurement of the branching ratio of the decay $K^+ \rightarrow \pi^+ \nu \bar{\nu}$ [...] CERN-THESIS-2021-194 - 77 p.

2021-08-27
15:06
 Dependable System Development Methodology and Case Study for the LHC Beam Loss Monitoring System at CERN / Schramm, Volker The Beam Loss Monitoring system acts as a protection system of the Large Hadron Collider at CERN [...] CERN-THESIS-2020-362 D93 ; ISBN978-3-936100-98-3. - Stuttgart, GER : Berichte aus dem Institut für Maschinenelemente, 2021-07-12. - 172 p.

2021-08-06
15:03
 Local Optics Corrections in the HL-LHC / Coello De Portugal - Martinez Vazquez, Jaime Maria In order to push the performance of current and future particle colliders, it is necessary to drive the beams at the locations of the experiments to decreasingly smaller sizes [...] CERN-THESIS-2021-104 - 93 p.

2021-07-25
23:14
 Accelerating cavity and higher order mode coupler design for the Future Circular Collider / Gorgi Zadeh, Shahnam CERN-THESIS-2020-358 - http://purl.uni-rostock.de/rosdok/id00003023 : Universität Rostock , 2021-05-11.

2021-07-13
15:39
 Direct Digitisation for Position Measurement of Charged Particle Beams: Sampling and Quantisation Effects on Resolution / Degl'Innocenti, Irene With the technology improvements of Analog-to-Digital Converters (ADC), notable in terms of sampling rate and achievable resolution, the direct digitisation of beam pickup signals is of growing interest in the ﬁeld of particle beam diagnostics for charged particle accelerators [...] CERN-THESIS-2020-357 -

2021-06-18
14:04
 Beam-Beam Long-Range Wire Compensation For Enhancing CERN LHC Performance / Poyet, Axel In high intensity and high energy colliders such as the CERN Large Hadron Collider and its future luminosity upgrade, interactions between the two beams around the different interaction points are one of the machine performance limitations [...] CERN-THESIS-2021-071 - 156 p.

2021-06-15
16:51
 Manufacturing Process Anomaly Detection in RF Cavities / Agius, Ryan In order to accelerate charged particles and output them at a constant and controllable energy, modern particle accelerators make use of hollow, torus-like metal structures known as Radio Frequency (RF) cavities [...] CERN-THESIS-2021-070 - 95 p.

2021-06-02
11:07
 Space charge and lattice driven resonances at the CERN injectors / Asvesta, Foteini The present dissertation focuses on the space charge phenomena in the presence of betatron resonances in the CERN Injectors and in particular the Proton Synchrotron (PS) and the Proton Synchrotron Booster (PSB) [...] CERN-THESIS-2020-344 -