# CERN Technical Student Program

2023-03-16
12:09
 Signal generation and acquisition platform for a stretched-wire Beam position Monitor test bench / Doetsch, Henrik The goal of this thesis was to develop new electronics for an existing test bench to calibrate BPMs [...] CERN-THESIS-2023-017 -

2023-03-09
11:44
 Monolithic diamond Raman resonators for high resolution spectroscopy / Stoikos, Georgios Tunable and spectrally pure lasers at visible wavelengths are key tools for many applications in physics, metrology and quantum technology [...] CERN-THESIS-2023-015 - 115 p.

2023-02-09
09:37
 Anomaly detection in data sets generated by the CERN Radiation Monitoring Electronic system CROME to develop predictive maintenance algorithms / Waldhauser, Felix Johannes Data-driven methods enable planning of maintenance actions based on failure predictions to keep failure rates of safety-critical systems such as CROME at an extremely low level and ensure high system availability and reliability [...] CERN-THESIS-2021-364 -

2023-02-01
15:44
 Radiation protection measurements during the commissioning of the third-generation n_TOF neutron spallation target at CERN / Lavezzari, Giacomo The neutron Time-Of-Flight (n_TOF) facility, operational at CERN since 2000, is a pulsed neutron spallation source producing neutrons between a few meV and several GeV for two experimental stations located 185 m horizontally from the target and 20 m above the target [...] CERN-THESIS-2022-292 - 90 p.

2023-01-05
16:01
 Characterization of the thermal contraction of superconducting magnet coils for the High-Luminosity upgrade of the Large Hadron Collider (HL-LHC) / Hoell, Stefan The High Luminosity upgrade of the Large Hadron Collider (HL-LHC) at CERN comprises several technological improvements such as the new focusing MQXF magnets, which are based on Nb$_3$Sn to increase the magnetic field strength [...] CERN-THESIS-2022-274 - 112 p.

2022-12-06
15:17
 Characterization Studies of a 65nm Radiation-Tolerant Pixel Readout Chip for the CMS Outer Tracker / Nookala, Anvesh The Large Hadron Collider (LHC) is the largest accelerator laboratory in the world and is operated by CERN, an international organization dedicated to particle physics research [...] CERN-THESIS-2022-296 - Vienna : Technische Unvierstaet Wien, 2022-11-18. - 107 p.

2022-11-08
15:51
 Numerical calibration of the bead-pull measurement setup for beam coupling impedance evaluation / El Dali, Dalia To identify the accelerator structures that are contributing to performance limitations and execute mitigation techniques, a precise estimate of the beam coupling impedance is required [...] CERN-THESIS-2022-189 -

2022-10-28
11:26
 Simulation of quench behaviour of the recombination dipole magnet for the LHC High Luminosity upgrade / Bender, Lennard Superconducting magnets are one of the key components of particle accelerators [...] CERN-THESIS-2022-168 - Freiburg : Lennard Bender, 2022-10-28.

2022-10-24
15:33
 Development of a container-based virtual appliance for developing and running HEP data analyses at CERN / Eberhardt, Jakob Karl The High Energy Physics (HEP) research community studies fundamental physics by analyzing petabytes of data produced in particle colliders and taken by particle detectors every year [...] CERN-THESIS-2022-164 - 43 p.

2022-10-14
16:16
 Hydrogen Embrittlement of TiZrV Non-Evaporable Getter Coating / Parragh, David Mate The study presented in this thesis work was performed to gain better understanding on the hydrogen saturation behavior of the TiZrV NEG coating, as well as on the effects of hydrogen sorption on the functionality of the coating [...] CERN-THESIS-2022-154 CERN-PBC-Notes-2022-007. - 2022. - 125 p.